RP-6 Reducer (For Steam) - VENN valve

 RP-6 Reducer (For Steam) Benten Public Building Association Evaluation Product Pilot-type general-purpose products (large capacity) such as building equipment and factory equipment * Attach a strainer to the primary side of the pressure reducing valve

Dead End Shut-off (MPa [kgf])	0.02 [0.2] or less
Secondary Pressure Adjustment Range (MPa)	0.03～0.8
Minimum Pressure Differential before and after Valve (MPa)	0.05
Allowable Leakage	0.05% or less of rated flow
Nominal Diameter (B)	1
Primary Side Csuitable Pressure (MPa)	1
Dimension L (mm)	150
Dimension H (mm)	160
Fluid Temperature (℃)	185 or less
Maximum Decompression Ratio	20:01
Nominal Diameter d	25
Nominal Diameter (A)	25
Cv Value	4
Dimension G (mm)	67
Mass (kg)	9
Material (Piston / Cylinder)	CAC (Bronze casting)
Material (Main Unit)	FC (Gray cast iron)
Specification	High durability and precision control
Other	Install a strainer on the primary side of the pressure reducing valve.
End Connection	JIS 10K FF flange
Type	Pilot type
Material (Diaphragm)	SUS (stainless steel)
Material (Valve / Valve Seat)	SUS (stainless steel)
Pressure Resistance (MPa [kgf/cm2])	Water pressure: 1.5 [15]
Offset	Within 0.02 MPa (secondary adjustment pressure 0.03 to 0.035 MPa) Within 0.03 MPa (secondary adjustment pressure 0.035 over 0.07 MPa) Within 0.05 MPa (secondary adjustment pressure 0.07 over 0.08 MPa)
Suitable Fluid	steam